-38%
د.ك1.85د.ك3.00
Brown Ochre Oil 37 ML
- Model:0-4961-A
More Products
د.ك2.00
د.ك1.00
Blue Decorative Particle 25 ML
د.ك1.55This particles are polyester and glass blends. Can be used on wood, polyester, ceramic, glass, canvas, fabric and many other surfaces.It is applied with specialArtdeco Glass BeadAdhesive.After applying with adhesive brush on the surface, the application is completed by pouring decorative particles before the adhesive dries.There are 5 different types of grain sizes.
- Model:Y-029A-P-4
Fixer Powder Fabric Paint
د.ك0.50Manual Dyeing; Use a large pot (enamel or stainless steel) in which the fabric
can move easily. Dissolve Powder Fabric Dye with hot water in a seperate small
cup. Pour the dissolved paint into the dyeing pot, add water (3,5-4 liters for
each 200gr of fabric), stir well and put to boil. Soak the fabric in cold water, put
it into the boiling pot and stir for 30-40 minutes over the stove until the fabric
absorbs the dye completely. While boiling, add 1 tablespoon of salt into the
pot without letting the salt contact with the fabric. Add 1 tablespoon of
vinegar into the paint mixture for wool fabrics. After the dyeing process, rinse
the fabric with cold water until all paint washes away. Pay attention not to rub.
Dyeing results may vary according to the type of fabrics. Best results are
achived with 100% cotton fabrics.
Fixation; Pour warm water and 25 ml of Artdeco Fixer into a bowl and mix. Put
the dyed and rinsed wet fabric into the bow and mix for 10-15 minutes. Hang
for drying without wringing out.
Machine Dyeing; Put the whole package of powder dye in the detergent
sortion of the washing machine adding 1 tablespoon of salt and ‘1 tablespon
of vinegar. Pour the whole content of fixator package in the softener sectioe
Set the machine to 2o degrees, run the program without prewash, hang the
fabric without wringing out.
Model:FIXER
Reviews
There are no reviews yet.