-15%
د.ك3.40د.ك4.00
Burnt Sienna Standard 220 ML
- Model:A-2401
More Products
د.ك5.00
د.ك0.66
د.ك1.00
د.ك0.66
Bitter Brown 500 ML
د.ك4.15Specially formulated to use on all kind surfaces. Water based, ready to use. Flawless coverage and satin finish on wood, glass, ceramic, porcelain, fabric, polyester, leather, plastic, metal, wall, stain, canvas and paper. Does not require primer or sandpaper. Wait for at least 21 days before cleaning in the dishwasher. Steam fixing by ironing for 3 minutes is recommended prior to use of washing machines. On glazed surfaces, for second coat of application wait minimum 12 hours. Not hazardous.
-
Bitter Brown 500 ML
Bead Blue 25 ML
د.ك0.55Water based and acrylic resin based colors. Suitable to use on wood, cardboard, glass, metal, polyes – ter, ceramics, canvas and many other surfaces. Scratch resistant.You can add a little Artdeco Glaze Medium for acrylic retarding. Colors can mix each other.The materials used in the painting are easily cleaned with water and soap.
- Model:Y-070A-3014
Black Powder Fabric Paint 13 GR
د.ك0.45Manual Dyeing; Use a large pot (enamel or stainless steel) in which the fabric
can move easily. Dissolve Powder Fabric Dye with hot water in a seperate small
cup. Pour the dissolved paint into the dyeing pot, add water (3,5-4 liters for
each 200gr of fabric), stir well and put to boil. Soak the fabric in cold water, put
it into the boiling pot and stir for 30-40 minutes over the stove until the fabric
absorbs the dye completely. While boiling, add 1 tablespoon of salt into the
pot without letting the salt contact with the fabric. Add 1 tablespoon of
vinegar into the paint mixture for wool fabrics. After the dyeing process, rinse
the fabric with cold water until all paint washes away. Pay attention not to rub.
Dyeing results may vary according to the type of fabrics. Best results are
achived with 100% cotton fabrics.
Fixation; Pour warm water and 25 ml of Artdeco Fixer into a bowl and mix. Put
the dyed and rinsed wet fabric into the bow and mix for 10-15 minutes. Hang
for drying without wringing out.
Machine Dyeing; Put the whole package of powder dye in the detergent
sortion of the washing machine adding 1 tablespoon of salt and ‘1 tablespon
of vinegar. Pour the whole content of fixator package in the softener sectioe
Set the machine to 2o degrees, run the program without prewash, hang the
fabric without wringing out.
Model:EN-71-BLACK
Flesh Tint 25 ML
د.ك0.55Water based and acrylic resin based colors. Suitable to use on wood, cardboard, glass, metal, polyes – ter, ceramics, canvas and many other surfaces. Scratch resistant.You can add a little Artdeco Glaze Medium for acrylic retarding. Colors can mix each other.The materials used in the painting are easily cleaned with water and soap.
- Model:Y-070A-3651
Reviews
There are no reviews yet.