-10%
د.ك2.70د.ك3.00
Reflex Yellow 120 ML
- Model:A-3317
More Products
د.ك2.00
د.ك1.00
د.ك2.00
Large Glass Bead 25 ML
د.ك1.35Transparent and colored glass beads for decorating wood, ceramics, glass and polyester objects. Bead diameters vary between 0,2-0,5 mm. Use together with Artdeco Glass Beads Adhesive. Not suitable to use on fabrics. If application on fabrics is desired, the fabric should not be washed.
- Model:Y-029A-B-3
Brown Powder Fabric Paint 13 GR
د.ك0.45Manual Dyeing; Use a large pot (enamel or stainless steel) in which the fabric
can move easily. Dissolve Powder Fabric Dye with hot water in a seperate small
cup. Pour the dissolved paint into the dyeing pot, add water (3,5-4 liters for
each 200gr of fabric), stir well and put to boil. Soak the fabric in cold water, put
it into the boiling pot and stir for 30-40 minutes over the stove until the fabric
absorbs the dye completely. While boiling, add 1 tablespoon of salt into the
pot without letting the salt contact with the fabric. Add 1 tablespoon of
vinegar into the paint mixture for wool fabrics. After the dyeing process, rinse
the fabric with cold water until all paint washes away. Pay attention not to rub.
Dyeing results may vary according to the type of fabrics. Best results are
achived with 100% cotton fabrics.
Fixation; Pour warm water and 25 ml of Artdeco Fixer into a bowl and mix. Put
the dyed and rinsed wet fabric into the bow and mix for 10-15 minutes. Hang
for drying without wringing out.
Machine Dyeing; Put the whole package of powder dye in the detergent
sortion of the washing machine adding 1 tablespoon of salt and ‘1 tablespon
of vinegar. Pour the whole content of fixator package in the softener sectioe
Set the machine to 2o degrees, run the program without prewash, hang the
fabric without wringing out.
Model:EN-71-BROWN
Violet Glitter Powder 25 ML
د.ك1.00Polyester based glitter powder for decorating several kinds of surfaces including wood, ceramics, and glass. Par ticles sized 1 micron create perfect results even in detailed projects. Application on fabrics requires the use of a special adhesive Artdeco Kleber. Mix the powder with adhesive and apply with a brush.The painted fabric requires heat setting by ironing on the reverse side after allowing a drying time of 24 hours.The steam function of the iron should be turned off.
Model:Y-012A-308
Reviews
There are no reviews yet.